BATTERY CHARGERS

INPUT 1 PH 100V TO 270V AC, 50 Hz
OUTPUT 13.5V± 0.3V DC, 8A MAX.
LINE/LOAD REGULATION ± 1%
RIPPLE & NOISE <25 mVp-p
OPERATING TEMPERATURE -40 °C to +60 °C
ADAPTOR IN PARALLEL 6A @ 18V TO RADIO, 12AH @ 14.8V TO BATTERY
DIMENSION 40mm(H) x 90 mm(W) x 200 mm(D)
COOLING SELF
PROTECTION AUTO RECOVERY
WEIGHT AL 5052 H32
MATERIAL 2KG
FINISH POWDER COATED
INDICATION LED - GREEN, ORANGE, RED
MATE Li-Ion BATTERY
CHARGING OPTIONS, FAST CHARGE 4A NORMAL CHARGE 2A
CERTIFICATION JSS-55555 & MIL-STD-461C
  • 7.4V-3.1AH LI-ION BATTERY (W/ LG CELLS)
  • OPERATING VOLTAGE: 7.4V (8.4V-5.7V)
  • MAX. DISCHARGE/CHARGE CURRENT: 2A/1A
  • BUILT-IN BMS FOR BATTERY PROTECTION, OVER-VOLTAGE,
  • UNDER-VOLTAGE, SHORT-CIRCUIT, OVER-TEMPERATURE
  • PROTECTION, THERMISTOR OUTPUT
  • SMBUS OUTPUT FOR MONITORING BATTERY PARAMETERS
  • OPERATING TEMPERATURE: -20 TO 60°C
  • CYCLE LIFE> 500 CYCLES @ 80% DOD
  • PVC-SLEEVE CASING: 70MM*40MM*20MM, WEIGHT: 100GM
ACDC Power Supply Specification:
INPUT 1 PH 90 TO 264V AC, 50 Hz
OUTPUT 12V DC, 1.6A, 20W
PROTECTION FUSE 2A
WEIGHT < 1 kg
CERTIFICATION JSS-55555 & MIL-STD-461C
TWO WAY RADIO DESKTOP CHARGER Specification
SOURCE 1 PH 160 - 260V AC, 50 Hz
INPUT AT CHARGER 9-36V DC 900mA
FAST CHARGE NORMAL CHARGE 2 HOURS 4 HOURS
BATTERY TYPE 3Ah LITHIUM-ION
BATTERY VOLTAGE 6.4V LOW, 7.4V NOMINAL, 8.4V HIGH
DISCHARGE 3 HOURS
ACDC Power Supply Specification:
INPUT 1 PH 90 TO 264V AC, 50 Hz
OUTPUT 12V DC, 1.6A, 30W
PROTECTION FUSE 2A
WEIGHT < 0.5kg
CERTIFICATION JSS-55555 & MIL-STD-461C
TWO WAY RADIO DESKTOP CHARGER Specification
SOURCE 1 PH 160 - 260V AC, 50 Hz
INPUT AT CHARGER 12-36V DC 900mA
FAST CHARGE NORMAL CHARGE 2 HOURS 4 HOURS
BATTERY TYPE 3Ah LITHIUM-ION
BATTERY VOLTAGE 6.4V LOW, 7.4V NOMINAL, 8.4V HIGH
DISCHARGE 3 HOURS
Commander Controller Unit Power distribution Board (CCU PDB), P/N : FV-CCU-PDB- 1000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be multiple single phase output distributed to various loads. It consists of a set of MCBs and a Power Controller Board for controlling the input power supply of CCU, MCU-1, MCU-2, MCU-3, MCU-4, DLTx, INS, RECU and Printer. The output from the MCBs for CCU and RECU will be provided to respective units. Output from MCU-1 to 4, DLTx& INS is given to Power Controller board. Power Controller Board receives the command from CCU processor for controlling the operation of Power switches/Relays. It also receives Voltage & Current feedback of DLTx & INS and post it to CCU Processor. CCU Processor uses the load voltage & current feedback for implementing safety features. Based on the command received from CCU Processor, it distributes power to various units. Specification
INPUT VOLTAGE 3 PH, 415V AC, 50Hz, 4 WIRE
OUTPUT VOLTAGE 1 PH, 230V AC, 50Hz, 9 Nos.
OPERATING ENVIRONMENT SEA STATE UP TO 5, WIND SPEED UP TO 50 KNOTS TEMPERATURE -10°C TO +55°C
PROTECTION OVERLOAD, SHORT-CIRCUIT
DIMENSION W221 X H400 X D490mm
WEIGHT <35kg
WARRANTY TWO YEARS

BATTERY CHARGERS