FV-MPT-PDB-1000

ADVANCED POWER SOLUTIONS

POWER DISTRIBUTION
FV-ADV-PDB-3000
FV-CCU-PDB-1000
FV-MCU-RA-1
FV-MPT-PDB-1000
FV-PMU-1000
FV-UPS-PDB-1000

Main Power Distribution Board, P/N: FV-MPT-PDB-1000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be one 3 phase as well as multiple single phase output distributed to various loads. It consists of a set of MCBs and toggle switches for controlling the input power supply for one 3 phase load and 10 single phase load. The 3 phase input power is first fed to a main MCB and then to a 3-phase power contactor. An ON /OFF PBs are provided for switching ON / OFF the main input power. A 3-phase power monitor is also provided at the front face of the unit to display the power input status. Emergency OFF PB is provided to switch off system in case of emergency. As briefed above, each power output can be switched ON/OFF using the respective toggle switch provided at the front facia of the unit. An LED indication provided for each output will glow to indicate the status of each output. 

Technical Specification
INPUT POWER 3 PH, 415V AC, 50Hz, 4 Wire with Ground
OUTPUT POWER 1 PH, 230V AC, 50Hz, 10 Nos.
3 PH, 1 Nos.
DIMENSION W500 X H236 X D524mm
OPERATING TEMPERATURE -20° C TO +55° C
ALTITUDE 3500m
STORAGE
TEMPERATURE
-30° C TO +70° C
HUMIDITY 95% RH AT 40° C (NON CONDENSING)
PROTECTION OVER VOLTAGE - AUTO RECOVERY
SHORT CIRCUIT - AUTO RECOVERY
MATERIAL
INSIDE ENCL.
OUTSIDE ENCL.
FINISH
AL 64430 HE 30 ALLOY
MIL-DTL-5541,TYPE 1, CLASS 3
PS-613-LAG-SGL, 697 OF BS 381C
STRIPPABLE LACQUER AS PER PS-615
WEIGHT 33 kg
 QUALIFICATION  JSS-55555