FV-ACDC-5V-15W
FV-HVPS-1000-28
FV-HVPS-2000-115
FV-INV-115
FV-MPSCU-5600
FV-VC-30-01
FV-VC-315-01
FV-VC-ACDC-26V-500
FV-VC-ACDC-27V-800
FV-VC-ACDC-40V-750
FV-VC-DI-5.5V-40
FV-VC-DI-I2V-150
POWER DISTRIBUTION
FV-ADV-PDB-3000
FV-CCU-PDB-1000
FV-MCU-RA-1
FV-MPT-PDB-1000
FV-PMU-1000
FV-UPS-PDB-1000
FV-ACDC-BC-18V-200
FV-LI-ION-BA-3100
FV-LI-ION-SBC-1000
FV-LI-ION-SBC-2000
FV-VC-ACDC-27V-800_Flier
Advanced Power Distribution Board, P/N: FV-ADV-PDB-3000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be 12 three phase, multiple single phase as well as 8 DC outputs distributed to various loads. It consists of a set of MCBs and Push button switches for controlling the input power supply for 12 three phase load, 9 single phase load and 8 DC load.
The 3 phase input power is first fed to a EMI Filter and then to a MCCB. ON /OFF PBs are provided for switching ON / OFF the main input power. 3-phase power monitor is also provided at the front facia of the unit to display the power input status. Emergency OFF PB is provided to switch system in case of emergency. As stated above, each power output can be switched ON/OFF using the respective Push button switch provided at the front facia of the unit. An LED indication provided for each output will glow to indicate the status of each output. HMI display is being provided to control and monitor the respective relays and contactors.
Product Features | |
INPUT POWER | 90KVA, 3 PH, 50Hz, 4 WIRE 415V±10% (L-L) 240V±10% (L-N) |
INPUT MONITOR | 7.4” TOUCH PANEL, |
INPUT CONTROL | ON / OFF PBs |
EMERGENCY | OFF PB |
OUTPUT CONTROL INDICATION |
ILLUMINATED DOUBLE HEADED PUSH BUTTONS |
DIMENSION | W400 X H828 X D820mm |
WEIGHT | <95kg |
Technical Specification | |
INPUT SOURCE | 90KVA, 3 PH, 50Hz, 4 WIRE |
SYSTEM VOLTAGE | 415V±10% (L-L) 240V±10% (L-N) |
OPERATING TEMPERATURE | -30° C TO +55° C |
STORAGE TEMPERATURE |
-30° C TO +70° C |
HUMIDITY | 95% RH AT 40°C (NON CONDENSING) |
PROTECTION | OVER & UNDER VOLTAGE RELAY FREQUENCY RELAY EMERGENCY SWITCH BYPASS SWITCH SHORT CIRCUIT SURGE PROTECTION INSULATION FAILURE PROTECTION |
MATERIAL | ALUMINIUM 6082-T6 |
FINISH: INSIDE ENCL. OUTSIDE ENCL. |
MIL-DTL-5541, TYPE 1, CLASS 1A 595B-FS-26628 & CORNER MEMBER DARK GREY PAINT |
QUALIFICATION | JSS-55555 & MIL 461E |
APPLICATION | TROOP LEVEL RADAR |