POWER MANAGEMENT

Advanced Power Distribution Board, P/N: FV-ADV-PDB-3000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input.

INPUT 115V AC, 60A
OPERATING TEMPERATURE -40º C to +85º C
HUMIDITY <95% NON CONDENSING
CONNECTOR MOLEX
PCB IPC-A-600
ASSEMBLY IPC-A-610
SOLDERING IPC J-STD-001
MATERIAL FR4
HMI TOUCH PANEL LEXAN 9034V
WEIGHT 500gm
DIMENSION 4.5 X 9.5 X 1 Inches
WARRANTY 24 MONTHS
CERTIFICATION JSS-55555 & MIL 461E, RTCA DO 160 CERTIFIED
APPLICATION AIRCRAFT INTERIOR, MICROWAVE OVEN
To be updated...
Advanced Power Distribution Board, P/N: FV-ADV-PDB-3000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be 12 three phase, multiple single phase as well as 8 DC outputs distributed to various loads. It consists of a set of MCBs and Push button switches for controlling the input power supply for 12 three phase load, 9 single phase load and 8 DC load. The 3 phase input power is first fed to a EMI Filter and then to a MCCB. ON /OFF PBs are provided for switching ON / OFF the main input power. 3-phase power monitor is also provided at the front facia of the unit to display the power input status. Emergency OFF PB is provided to switch system in case of emergency. As stated above, each power output can be switched ON/OFF using the respective Push button switch provided at the front facia of the unit. An LED indication provided for each output will glow to indicate the status of each output. HMI display is being provided to control and monitor the respective relays and contacters.
Commander Controller Unit Power distribution Board (CCU PDB), P/N : FV-CCU-PDB- 1000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be multiple single phase output distributed to various loads. It consists of a set of MCBs and a Power Controller Board for controlling the input power supply of CCU, MCU-1, MCU-2, MCU-3, MCU-4, DLTx, INS, RECU and Printer. The output from the MCBs for CCU and RECU will be provided to respective units. Output from MCU-1 to 4, DLTx& INS is given to Power Controller board. Power Controller Board receives the command from CCU processor for controlling the operation of Power switches/Relays. It also receives Voltage & Current feedback of DLTx & INS and post it to CCU Processor. CCU Processor uses the load voltage & current feedback for implementing safety features. Based on the command received from CCU Processor, it distributes power to various units.
MATERIAL AL 6061-T6
FINISH: INSIDE OUTSIDE RAL 7040, WINDOW GRAY, SEMI GLOSS RAL 7035,LIGHT GRAY, SEMI GLOSS
DIMENSION W674 X H580 X D772mm
WEIGHT <35kg
WARRANTY TWO YEARS
Main Power Distribution Board, P/N: FV-MPT-PDB-1000 is a wall mountable power distribution unit with 3-Phase, 415V, 4 wire power input. There will be one 3 phase as well as multiple single phase output distributed to various loads. It consists of a set of MCBs and toggle switches for controlling the input power supply for one 3 phase load and 10 single phase load. The 3 phase input power is first fed to a main MCB and then to a 3-phase power contactor. An ON /OFF PBs are provided for switching ON / OFF the main input power. A 3-phase power monitor is also provided at the front face of the unit to display the power input status. Emergency OFF PB is provided to switch off system in case of emergency. As briefed above, each power output can be switched ON/OFF using the respective toggle switch provided at the front facia of the unit. An LED indication provided for each output will glow to indicate the status of each output.
Power management unit 3.0 is a battery charger that takes I/P of 28VDC and produces O/P of Photovoltaic (solar) voltage upto 90V. Product Specifications - AC DC SPECIFICATIONS: I/P : 185-285 VAC; 50 Hz O/P : 24VDC, >20A EFFICIENCY : > 85% PROTECTION : SHORT CIRCUIT, I/P OVER & UNDER VOLTAGE, OVER LOAD, INRUSH CURRENT MPPT CHARGER SPECIFICATIONS: PANEL I/P VOLTAGE : 35-95 V O/P : 24VDC, > 20A EFFICIENCY : >90% PROTECTIONS : REVERSE PV CONNECTION ELECTRONICALLY PROTECTED (NOT USING FUSE). REVERSE BATTERY CONNECTIONS ELECTRONICALLY PROTECTED. (NOT USING FUSE). NO REVERSE CURRENT FLOW DURING NIGHT. PMU LOAD CONTROLLER UNIT SPECIFICATIONS: ETHERNET/ USB / RS232 INTERFACE FOR HEALTH PARAMETER & REMOTE CONTROL & MONITORING.
UPS Power Distribution Board, P/N: FV-UPS-PDB-1000 is a wall mountable power distribution unit, Single Phase, 230V, 2 wire with ground power input. There will be multiple single phase output distributed to various loads. It consists of a set of MCBs and toggle switches for controlling the input power supply for 9 single phase load. The single phase input power is first fed to a single phase power contactor. ON /OFF PBs are provided for switching ON / OFF the main input power. A single phase power monitor is also provided at the front facia of the unit to display the power input status. Emergency OFF PB is provided to switch OFF system in case of emergency. As mentioned above, each power output can be switched ON/OFF using the respective toggle switch provided at the front facia of the unit. An LED indication provided for each output will glow to indicate the status of each output.